|
|
|
StorageNet® 3300 Fibre Channel router |
| The
bi-directional StorageTek® StorageNet 3300 (SN3300)
router revitalizes SCSI-interfaced devices by seamlessly
connecting them to Fibre Channel (FC) storage area
networks (SANs). It enables SCSI devices to operate at
full speed and optimum efficiency, preserving their
value. |
| |
|
|
| Spec Summary |
 |
|
|
|
|
|
|
|
|
Number of
ports: |
1 FC, 2
SCSI
|
|
|
|
Total
aggregate performance: |
160
MB/sec |
|
|
|
Fibre Channel
port speed: |
1 or 2 Gb/sec
|
|
|
|
| |
|
Applications |
Disaster recovery
StorageNet routers also play a critical role in
integrating SCSI devices into comprehensive recovery
systems, including SANs for remote data vaulting and
backup and restore functions. |
Backup and restore
StorageNet routers play a key role in efficiently
integrating SCSI devices into backup and restore
storage area networks (SANs). |
|
| |
|
Benefits |
Low cost two-gigabit connectivity
With a two-gigabit Fibre Channel port and maximum
throughput of 160 megabytes per second, the SN3300
Fibre Channel router integrates tape libraries into
high-performance FC SANs. |
Ease of use, ease of installation
Easy to install with accurate device mapping and
security built right in. Plus, it features unmatched
interoperability with other SAN components. |
Server-free backup and restore
Offload the work of moving blocks of data from the
application server to the SN3300 router located on a
SAN. |
High performance for faster backups
Supports LAN-free backup and restore, moving the
bulk of data backup and recovery traffic from the
LAN onto the SAN. SCSI devices operate at optimum
efficiency. |
Storage centralization and consolidation
By moving existing storage to a central location,
you enhance security, accelerate data
flow, simplify management, reduce costs and calm the
chaos in your data center. |
|
| |
|
Features |
Two-gigabyte Fibre Channel (FC) port
Connects any point-to-point, arbitrated loop or
switched fabric topology – rapidly and reliably.
|
Crossroads Visual Manager (CVM)
Point and click management via a graphical user
interface (GUI) makes the SN3300 Fibre Channel
router easy to manage and configure. |
Remote site connectivity
Increases the operating span of SCSI hosts and
devices up to 10 kilometers making it ideal for
facilitating remote storage for disaster recovery. |
Two SCSI ports
This router is available in low voltage
differential/single-ended models. Negotiation for
fast, narrow, wide, Ultra wide and Ultra 2 SCSI is
automatic. |
|
| |
|
Specifications |
| |
Performance |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
SCSI :
|
Two Buses, Very
High Density Cable Interconnect (VHDCI)
Concurrent commands, tagged command queuing and
disconnect/reconnect
Disk, tape, optical, and changer devices
HVD or LVD/SE connections
small form factor
SCSI initiator mode only
Auto-negotiating SCSI buses
(Fast, Narrow, Wide and up to Ultra 160)
Ultra 160 SCSI for data transfer up to 160 MB/sec
per LVD bus
Ultra SCSI for data transfer up to 40 MB/sec per HVD
bus
SCSI-2 and SCSI-3 protocols
SCC automatic and custom addressing modes
|
|
| |
Total
aggregate performance: |
160 MB/sec
|
|
| |
Fibre
Channel: |
Single 2.125 Gb/sec
port
Fibre Channel initiator and target modes
Full-duplex send and receiver buffers
Fibre Channel Arbitrated Loop (FC-AL) and Switched
Fabric
(FC-SW) topologies
Class 3 connection with SCSI-FCP protocol
Private Loop Direct Attach (PLDA) profile
Hard and soft addressing modes
Small Formfactor PluggableTransceiver (SFP)
Multi-mode (shortwave) optical fiber
|
|
| |
Fibre
Channel port speed: |
1 or 2 Gb/sec
|
|
|
|
|
|
| |
Capacity |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Number
of ports: |
1 FC, 2 SCSI
|
|
|
|
|
|
| |
Availability |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Serviceability: |
Field upgradeable
firmware
|
|
|
|
|
|
| |
Management |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Management access: |
10/100 Ethernet
RJ-45 connector for FTP, Telnet and web browser
access
Serial RJ-11 connector for terminal access
CVMTM (HTTP) (see the Crossroads CVM data sheet)
SNMP with FA MIB 2.2 and private MIB support
DHCP for easier network administration
Copy Manager and Controller LUN Commands
SCC (FC only), Indexed, and Auto Assigned addressing
modes
|
|
|
|
|
|
| |
Mechanical |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Depth:
|
10.75 in (27.3 cm)
|
|
| |
Width:
|
17.0 in (43.18 cm)
|
|
| |
Unit
height: |
1 u
|
|
| |
Weight: |
9.0 lb (4.0 kg)
|
|
| |
Height: |
1.70 in (4.31 cm)
|
|
|
|
|
|
| |
Environmental |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Humidity: |
5%–80%
non-condensing
|
|
| |
Temperature: |
0 to 50 °C
|
|
|
|
|
|
| |
Power |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Power
input (auto–sensing): |
100–240 VAC @
50/60 hz, 1.0 Amps
|
|
|
|
|
|
| |
Regulatory Compliance |
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Safety
and emmissions: |
FCC class A, UL
06950, cUL, CE, VCCI, AS/NZS 3548, TUV GS, EN
60825-1
|
|
|
|
|
