|
|
|
The StorageTek® D200 disk
array is a two gigabit per second disk array that
delivers up to two terabytes of storage capacity while
helping you leverage high-IOPS and high-throughput
applications. The D200 array is compatible with the full
range of StorageTek’s D-Series disk subsystems. |
|
|
|
|
| Spec Summary |
 |
|
|
|
|
|
|
|
|
Drive
capacity: |
36, 73 and
146 GB
|
|
|
|
Rotational
velocity: |
10,000 and
15,000 RPM
|
|
|
|
Disk array
interface: |
"200
MB/sec per interface, 400 MB/sec total
|
|
|
|
Drive
interface: |
Dual,
independent FC-AL interface ports each drive
200 MB/sec, 400 MB/sec total |
|
|
|
|
Applications |
Capacity
expansion
The D200 disk array can be added to existing D-Series
disk systems to expand up to their maximum capacity. The
D200 disk array can be added on the fly, and operates in
both one-gigabit per second and two gigabit per second
environments. |
|
|
|
Benefits |
Increased
availability
The D200 array helps you eliminate downtime costs by
enabling you to add disk capacity on the fly and
maintain constant access to your data. |
Investment protection
StorageTek offers the full range of scalability—from
entry-level through enterprise-class—and allows you
to leverage D-Series investments. |
Exceptional performance
Ready for implementation into either one-gigabit per
second or two gigabit per second environments, D200
disk array delivers the performance you need to meet
service level agreements. |
|
|
|
|
Features |
SAN-readiness
With its full Fibre Channel connectivity, the D200
disk array is ready for use in high-performance
storage area networks. |
Two
gigabits per second connectivity
The D200 disk array offers dual drive channels with
four 2 gigabit per second small form-factor
pluggable (SFP) connections. |
Simple
scalability
With multiple arrays you can easily expand capacity
for your D-Series controllers. The D200 subsystem
holds up to 14 drives for a maximum capacity of two
terabytes (with 146 gigabyte drives). |
D-Series
support
The D200 disk array is supported by all StorageTek
D-Series controllers in both one gigabit and
two-gigabit environments. It scales from the
entry-level D173 subsystem up to the
enterprise-class D280 system. |
Supported
drives
36 GB (10,000 rpm and 15,000 rpm)
73 GB (10,000 rpm)
146 GB (10,000 rpm) |
D200-014
Up to 14-low profile (one inch) Fibre Channel disk
drives |
|
|
|
|
Specifications |
|
Performance |
|
|
|
|
| |
|
|
|
|
|
|
| |
Drive
interface: |
Dual, independent
FC-AL interface ports each drive 200 MB/sec, 400
MB/sec total
|
| |
Rotational velocity: |
10,000 and 15,000
RPM
|
| |
Disk
array interface: |
"200 MB/sec per
interface, 400 MB/sec total
|
|
|
|
|
| |
Capacity |
|
|
|
|
| |
|
|
|
|
|
|
| |
Drive
capacity: |
36, 73 and 146 GB
|
| |
Drive
array capacity: |
15 drives, 2 TB
(using 146 GB drives)
|
| |
Host
interfaces: |
2 Fibre Channel
ports with Optical Small Form-Factor Pluggable (SFP)
interfaces
|
|
|
|
|
| |
Compatibility |
|
|
|
|
| |
|
|
|
|
|
|
| |
Supported disk systems: |
D173, D220, D240,
D178, D280
|
|
|
|
|
| |
Mechanical |
|
|
|
|
| |
|
|
|
|
|
|
| |
Width:
|
19.0 in (48.2 cm)
|
| |
Height: |
5.2 in (13.1 cm)
|
| |
Depth:
|
22.8 in (57.9 cm)
|
| |
Weight: |
88 lb (40 kg) with
14 drives
|
| |
Optical cable length (maximum): |
500 m external to
array
500 m drive array to drive array in a JBOD
configuration
45 km using the StorageNet access hubs
|
|
|
|
|
| |
Environmental |
|
|
|
|
| |
|
|
|
|
|
|
| |
Temperature: |
+50° to +104° F
(+10° to +40° C)
|
| |
Humidity (non-condensing): |
20% - 80%
|
| |
Altitude: |
Maximum 8,000 ft
(2,438.4 m) @ 104° F (40° C)
Maximum 10,000 ft (3,048 m) @ 98.6° F (37° C)
|
| |
Temperature gradient: |
10° C/hr
|
|
|
|
|
| |
Power |
|
|
|
|
| |
|
|
|
|
|
|
| |
Input
requirements: |
47 to 63 Hz, 90 to
264 Vrms, single phase
|
| |
Power
factor: |
0.95 minimum
|
|
|
|
|
| |
Regulatory Compliance |
|
|
|
|
| |
|
|
|
|
|
|
| |
EMC:
|
FCC Class B CSA
C22.2-950
VCCI Class 2 EN60950
EN55022 Class B CE Mark
|
| |
Safety: |
U.L. 1950
Manufactured under an ISO 9000-registered quality
system.
|
|
|
|
