Tape Storage

Disk Storage

  Disk System
 

Disk Arrays

 - 9170-014 Array
 - D200 Disk Array
Storage Networking
Storage Management

 

 

 

 

 

 

 

 

 

 

 

 

9170-014 array
 
The StorageTek® 9170-014 disk array delivers up to two terabytes of storage capacity in compatible D-Series disk subsystems. With its simple scalability and high-speed performance, this disk array can help you meet the capacity and performance requirements of StorageTek D173 or D178 disk subsystems.
 
Spec Summary
   
Drive capacity: 36, 73 and 146 GB
Rotational velocity: 10,000 and 15,000 RPM
Disk array interface: 100 MB/sec per host interface, 200 MB/sec total
100 MB.sec per expansion interface, 200 MB/sec total
Drive interface: Dual, independent FC-AL interface ports each drive 100 MB/sec each, 200 MB/sec total
 
Applications
Capacity expansion
The D9170-014 disk array can be added to existing D173 and D178 disk systems to expand up to their maximum capacity. The 9170-014 disk array can be added on the fly, and operates in one gigabit per second environments.
 
Benefits
Increased availability
The 9170-014 disk array helps you eliminate downtime costs by enabling you to add disk capacity on the fly and maintain constant access to your data.
Investment protection
StorageTek offers the full range of scalability—from entry-level through enterprise-class—and allows you to leverage D-Series investments.
Exceptional performance
Designed for one-gigabit per second environments, the D9170-014 disk array helps you meet your service level agreements.
 
Features
Standard features:
One gigabit per second connectivity
The 9170-014 disk array offers dual drive channels with four 1 gigabit per second interface converter (GBIC) connections.
SAN-readiness
With their full Fibre Channel connectivity, the 9170 disk array is ready for use in high-performance storage area networks.
Simple scalability
Scalability ranges from six drives to 224 drives and more than 32 terabytes of capacity. With 9170 disk arrays, you can accommodate changing needs simply by swapping the controller.
D-Series support
The 9170-014 disk array is supported by the StorageTek D173 and D178 disk subsystems. The array can be transferred from one D-Series disk subsystem to another, including the legacy 9176 system.
Options:
Supported drives
36 GB (10,000 rpm and 15,000 rpm)
73 GB (10,000 rpm)
146 GB (10,000 rpm)
9170-014
Up to 14-low profile (one inch) Fibre Channel disk drives
 
Specifications
Performance
     
  Disk array interface: 100 MB/sec per host interface, 200 MB/sec total
100 MB.sec per expansion interface, 200 MB/sec total
 
  Drive interface: Dual, independent FC-AL interface ports each drive 100 MB/sec each, 200 MB/sec total
 
  Rotational velocity: 10,000 and 15,000 RPM
 
  Capacity
     
  System capacity  
  Drive capacity: 36, 73 and 146 GB
 
  Drive array capacity: 14 drives, 2 TB (using 146 GB drives)
 
  Host interfaces: 2 host inputs per array
2 expansion inputs per array
1 Gb/sec Gigabit Interface Converter (GBIC) interfaces
 
  Compatibility
     
  Supported disk systems: D173, 9176
 
  Mechanical
     
  Width: 19.0 in (48.2 cm)
 
  Height: 5.2 in (13.1 cm)
 
  Depth: 22.8 in (57.9 cm)
 
  Weight: 88 lb (40 kg) with 14 drives
 
  Optical cable length (maximum): 500 m external to array
500 m drive array to drive array in a JBOD configuration
45 km using the StorageNet access hubs
 
  Environmental
     
  Input requirements: +50° to +104° F (+10° to +40° C)
 
  Humidity (non-condensing): 20%–80%
 
  Altitude: Maximum 8,000 ft (2,438.4 m) @ 104° F (40° C)
Maximum 10,000 ft (3,048 m) @ 98.6° F (37° C)
 
  Temperature gradient: 10° C/hr
 
  Power
     
  Input requirements: 47 to 63 Hz, 90 to 264 Vrms, single phase
 
  Power factor: 0.95 minimum
 
  Regulatory Compliance
     
  EMC: FCC Class B CSA C22.2-950
VCCI Class 2 EN60950
EN55022 Class B CE Mark
 
  Safety: U.L. 1950
Manufactured under an ISO 9000-registered quality system.
 

Copyright © 2003 [Millennia Infokom Technologi]. All rights reserved.
Revised: December, 2003